Audiovector Freedom Concept for R1, R3, R6 Arreté
Note images show European mains plug. Cables supplied will use standard UK 3 pin plug.
Audiovector Freedom is a new and revolutionary grounding technology, which addresses the movement induced distortion of and between the drive units in a loudspeaker. The currencies running between the chassis are being processed and dealt with through a new separate crossover, which routes the signal to the ground terminal of your wall socket or your grounded mains distributor. Contrary to conventional knowledge, these currencies cause coloration and distortion between the drive units. By balancing and filtering these through a dedicated separate filter and by offering the possibility of connecting them to earth/ground, we achieve a clean, very accurate, much more realistic sound with low noise floor.
Note images show European mains plug. Cables supplied will use standard UK 3 pin plug.
- Reduction of distortion of 3 dB (approx. 50%)
- Special dedicated filter exclusively for the grounding purpose
- No active connection. On mains plugs, only ground is connected, no voltage
- Noise floor is at a minimum
- 2 x 5m
- Custom lengths available
